Login  |  Register
CarZone Auto | Nissan and Infiniti Service Center
Search for Nissan
Dealers Near You Nissanhelp.com
Local Dealers
  OBDII Codes Powered by
OBD2-OBDII Codes | Engine-Codes.com

P2123 2003 INFINITI G35

P2123 2003 INFINITI G35 - Accelerator Pedal Position Sensor Circuit Range/Performance

Possible causes
- Faulty Accelerator Pedal Position Sensor
- Accelerator Pedal Position Sensor harness is open or shorted
- Accelerator Pedal Position Sensor circuit poor electrical connection
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- No Accelerator Pedal respsonse
P2123 2003 INFINITI G35 Description
The Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM).
Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM.
In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals.
Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation
such as fuel cut.
Need more help?
Need parts?